Andreas’s family comes from Scandinavia, and his wife’s father built saunas for a living. So when they asked for a basement bathroom with a sauna in their Newmarket home, the sauna had to be done properly.
Moving a load-bearing post
A load-bearing post stood where the bathroom needed to go. We brought in a structural engineer and an architect, and got a permit from the City of Newmarket. The plan replaced the one post with two new posts hidden inside the walls.
We dug new footings and poured them with about 60 bags of 30 kg concrete, mixed on site. The concrete cured for 30 days before we set the new posts and took the old one out.
The bathroom
After framing and floor heating, we built a curbless shower with a niche, waterproofed with Schluter. The sauna has its own drain and no barrier at the door, so the room has two drained wet areas. Both are waterproofed with Schluter.
The sauna
The sauna is built to code. It has insulation, an aluminum vapour barrier, an air gap and knot-free cedar, with proper ventilation. We used a Swedish heater that stays safe to touch on the outside, which matters with two young children in the house.
The work went through both City and ESA permits, and the electrical was done by a licensed electrician under our coordination. Andreas left us a good review.
Have A Question
-
Can you move a load-bearing post in a basement?
Yes, with an engineer and a permit. In this house a structural engineer and architect designed two new posts hidden in the walls. We poured new footings, let them cure for 30 days, then removed the old post.
-
How is a home sauna built to code?
This one has insulation, an aluminum vapour barrier, an air gap, knot-free cedar and ventilation. The work was covered by City and ESA permits.
-
Is a home sauna safe with young children?
We chose a Swedish heater that stays safe to touch on the outside. With two young kids in this house, that was an important part of the design.